SPECIFICATION...
 
Exceeds DOT standards
For hydraulic brake and clutch systems
Würth DOT 3 brake fluid meets and exceeds the current international specifications of US FMVSS No. 16 DOT 3, SAE J1703 and ISO 4925 (Class 3)
 
Can be mixed with all brake fluids meeting the same specifications
 
Recommended for use in passenger cars, commercial vehicles and motorcycles with hydraulic brake and clutch systems
Where a non-petroleum based fluid is to be used
 
Provides excellent protection against corrosion of iron and non-ferrous metals
 
Will not damage rubber parts
High thermal stability
Notice
Keep the brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake failure or costly repairs.
Store brake fluid only in its original container. Keep container clean and tightly closed to prevent absorption of moisture. Moisture will lower the grade of the fluid.
Do not refill container and do not use for other liquids.
Dispose of used brake fluid responsibly.
Brake fluid damages paint work –if spilt wash off immediately with plenty of water.
Application areaFor Hydraulic Brake and Clutch Systems
Instructions..
The brake fluid must be changed in the vehicle every 2 years. Follow the recommendations of the vehicle manufacturer when adding or changing the brake fluid.
Application areaFor Hydraulic Brake and Clutch Systems
Instructions
The brake fluid must be changed in the vehicle every 2 years. Follow the recommendations of the vehicle manufacturer when adding or changing the brake fluid.
TECHNICAL INFORMATION..
Contents
250 ml
Colour
Red
Shelf life from production
24 Month
Min. wet boiling point
140 °C
Min. dry boiling point
205 °C
Density
1.089 g/cm³
Density conditions
at 25°C
pH value
7-11