Shear-proof dry synthetic wax with PTFE
- Silicone-free: Yes
- Acid-free: Yes
- Resin-free: Yes
- AOX-free: Yes
- Resistance against: Salt water, Weak lyes, Weak acids, Splash
- Pour point: -20 °C
- Contents: 400 ml
- Shelf life from production: 24 Month
- Chemical basis: Synthetic wax oxidant
- Oil basis: Synthetic wax
- Colour: Yellow, Brown
- Smell/fragrance: Characteristic
- Density: 0.714 g/cm³
- Min. temperature conditions: -30 °C
- Max. temperature conditions: 100 °C
- Min. flashing point: 130 °C
Wuerth HHS® Drylube
Dry synthetic wax
- Lubricant does not shear on fast-rotating and rotating parts
- Low adhesion of dust
- Excellent corrosion protection
Outstanding creep and gap penetration characteristics
- Lubricates hard-to-reach areas
- Penetrates even the smallest gaps
- Protects against "sagging"
Contains PTFE solid lubricant
Good emergency running property and temperature resistance.
Excellent material compatibility
- Protects and maintains O-rings and X-rings
- Compatible with plastic
- Neutral behaviour with painted surfaces
Resistant to spray water and salt water, weak acids and bases
Free from silicone, resin and acids
Notice
This product is not subject to the viscosity classification. Shortly after being sprayed on, the product forms a highly effective, wax-based dry lubricating film, thereby ensuring optimum protection against lubrication.
The usage instructions are recommendations based on the tests we have conducted and our experience; carry out your own tests before each application. Due to the large number of applications and storage and processing conditions, we do not assume any liability for a specific application result. Insofar as our free customer service provides technical information or acts as an advisory service, no responsibility is assumed by this service except where the advice or information given falls within the scope of our specified, contractually agreed service or the advisor was acting deliberately. We guarantee consistent quality of our products. We reserve the right to make technical changes and further develop products.